|
Post by velrun on Jul 21, 2021 19:18:12 GMT
I am trying to create dungeons using the system provided with the explanation provided but I am having a hard time. I believe I can replicate your Madhouse (1, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 7,) except I do not know how to write the double rooms-style. Can you please share? I hope that example will be enough for me to understand the double rooms-style logic.
|
|
lux
1/1 Squirrel
Posts: 64
|
Post by lux on Jul 21, 2021 20:10:57 GMT
Is it possible to have multiple pop-outs images in one card? For my pokemon custom set I would like to put several icons of pokemon items in text box, or in other places, but seems that currently the program support only 1 single pop-out image for card.
|
|
|
Post by cajun on Jul 22, 2021 5:26:09 GMT
I am trying to create dungeons using the system provided with the explanation provided but I am having a hard time. I believe I can replicate your Madhouse (1, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5, 6, 6, 7,) except I do not know how to write the double rooms-style. Can you please share? I hope that example will be enough for me to understand the double rooms-style logic.
the option under that one is for double rooms, adding "3," there will replicate that double room on the 3rd level for your errors, see if these fix the issues Is it possible to have multiple pop-outs images in one card? For my pokemon custom set I would like to put several icons of pokemon items in text box, or in other places, but seems that currently the program support only 1 single pop-out image for card. you'd have all the popped elements in one transparent image and have the popout image cover the whole area or them all
|
|
|
Post by Tesagk on Jul 22, 2021 11:55:01 GMT
You might have to refresh it to get the update, but I updated the blanks again. Realized the lighting source was coming from the right as evidenced by the PT shadow, and, of course, the smaller PTs needed shadow as well. Though I suppose with the work I've put into it, I should maybe just figure out how to make the template myself. 😅
|
|
shagore
0/0 Germ
Posts: 16
Favorite Card: Twisted Reflection
Color Alignment: White, Blue, Red
|
Post by shagore on Jul 22, 2021 12:29:46 GMT
I tried several times to update (with the various patches), then to fully replace the Mainframes, then to reinstall MSE from scratch, but I still can't seem to get the planeswalkers' custom masks to work. see if adding this to MSE/data/magic-m15-mainframe-planeswalker.mse-style fixes it It appears now masks are having an effect, but it's not properly working. Sub-boxes are superposed between the automatic creation from MSE and the one from the mask, and it seems now the title and type lines remain above the image despite the mask. Here you can see the effect on sub-textboxes. According to the mask and to the preview when placing the image, the quiver and the hair should pop out on the top and the arrow should pop out on the bottom. Yet here all I can see is the slight white bars because my mask isn't great (old one)
|
|
lux
1/1 Squirrel
Posts: 64
|
Post by lux on Jul 22, 2021 18:15:15 GMT
Is it possible to have multiple pop-outs images in one card? For my pokemon custom set I would like to put several icons of pokemon items in text box, or in other places, but seems that currently the program support only 1 single pop-out image for card. you'd have all the popped elements in one transparent image and have the popout image cover the whole area or them all Ugh. thats not really a solution since you need to know in advance how to compose all the pieces to fit perfectly on the card, it's easier to just copypaste the single elements on photoshop at this point
|
|
|
Post by cardist on Jul 22, 2021 20:44:33 GMT
Hello Cajun. I've made some modifications that are a bit WIP rn. These are modifications to the puma look, in response to silverback_ape 's request. I might edit this post with some pictures of it. I'll make a push request on Github as soon as it's ready. I'm just wondering, would you want it to be its own option or replace the puma option altogether? Because I have it set up as "newpuma" rn in my MSE. Here's an example from my unfinished custom set.
|
|
|
Post by cajun on Jul 23, 2021 4:10:23 GMT
Hello Cajun. I've made some modifications that are a bit WIP rn. These are modifications to the puma look, in response to silverback_ape 's request. I might edit this post with some pictures of it. I'll make a push request on Github as soon as it's ready. I'm just wondering, would you want it to be its own option or replace the puma option altogether? Because I have it set up as "newpuma" rn in my MSE. if we're updating puma it'd replace the current
|
|
|
Post by velrun on Jul 23, 2021 13:13:35 GMT
the option under that one is for double rooms, adding "3," there will replicate that double room on the 3rd level for your errors, see if these fix the issues
Like this? It doesn't seem to work. It also doesn't change anything if I add a "," after the "3". What am I doing wrong?
The console issues went away. It's completely problem-free now!
|
|
|
Post by cajun on Jul 23, 2021 17:02:50 GMT
Like this? It doesn't seem to work. It also doesn't change anything if I add a "," after the "3". What am I doing wrong? add a comma after the 3, remove those spaces in the room notation option
|
|
Reality Glitch
2/2 Zombie
Posts: 131
Color Alignment: White, Blue, Red, Green, Colorless
|
Post by Reality Glitch on Jul 25, 2021 8:45:15 GMT
I think my previous request got buried: I'm wondering if we can get a foil stamp update that allows toggling between the Magic: the Gathering and Universes Beyond foil stamps.
|
|
|
Post by velrun on Jul 25, 2021 17:31:56 GMT
add a comma after the 3, remove those spaces in the room notation option It's so beautiful!
Do you have a patroen account? Or a donate option?
Thank you so much for the help. I know it has been a lot of questions.
|
|
|
Post by cardist on Jul 26, 2021 13:11:42 GMT
Hello Cajun. I've made some modifications that are a bit WIP rn. These are modifications to the puma look, in response to silverback_ape 's request. I might edit this post with some pictures of it. I'll make a push request on Github as soon as it's ready. I'm just wondering, would you want it to be its own option or replace the puma option altogether? Because I have it set up as "newpuma" rn in my MSE. if we're updating puma it'd replace the current Okay, I've sent the update through. If it's alright with you, I'm working on a version for the planeswalker and will submit a pull request for that as well. On somewhat of a tangent. I managed to get Udelude's effects to haphazardly work with your mainframe code. If I can get a fully stable version of that going, would you want it? Idk how to get in touch with Udelude, as they are not active on this new site currently. And I tried sending a message via their own website, but I wasn't able to send the message. So their sort of impossible to reach out to atm. Unless you know of any way to. EDIT: Please ignore the arbitrary change at line 135. That was a leftover from my experimenting. But that variable behaves the same as before. Also, could you educate me on z index. I feel like I put it at the right layer (index 1), but I'm not sure. It sure seems to behave like it's on the correct layer anyways. Some examples from my custom set: P.S. If you are going to use a hybrid with this, I recommend using the "Hybrid" option of "Hybrid Name". That way the colors on the type line will display correctly. There is currently no way to get the grey color on the name line only. I will see if that is a possibility. Here is an example of the grey name line and hybrid type line that is to be expected:
|
|
|
Post by cajun on Jul 26, 2021 20:15:51 GMT
I think my previous request got buried: I'm wondering if we can get a foil stamp update that allows toggling between the Magic: the Gathering and Universes Beyond foil stamps. do we even have any universe beyond stamps yet
Do you have a patroen account? Or a donate option?
Thank you so much for the help. I know it has been a lot of questions.
i am cajun42 on ko-fi~ On somewhat of a tangent. I managed to get Udelude's effects to haphazardly work with your mainframe code. If I can get a fully stable version of that going, would you want it? Idk how to get in touch with Udelude, as they are not active on this new site currently. And I tried sending a message via their own website, but I wasn't able to send the message. So their sort of impossible to reach out to atm. Unless you know of any way to. Udelude went on a mission to explain the evils of technology to children (yes, really (like, completely seriously)) so i don't think you'll be able to contact them. what udelude effects are you talking about
|
|
|
Post by nicochulo2001 on Jul 26, 2021 20:26:48 GMT
I think my previous request got buried: I'm wondering if we can get a foil stamp update that allows toggling between the Magic: the Gathering and Universes Beyond foil stamps. do we even have any universe beyond stamps yet According to mtg.fandom.com/wiki/Universes_Beyond, we do indeed have the triangular stamp, and they provide a high-quality image. About the card formatting, the Walking Dead cards were grandfathered in so they conveniently have the stamp (can be seen in the image below). Couldn't paste in the stamp image but it is available
|
|
spazlaz
6/6 Wurm
Posts: 335
Color Alignment: Blue, Black
|
Post by spazlaz on Jul 27, 2021 1:59:17 GMT
I did a clean re-install of your latest files cajun , but some errors that I had from my previous version still are happening. I put the files in a secondary hard drive I have in the programfiles 86 folder where the previous one was
These are my errors:
1. The console has a million error messages. 2. When I try to load my most recent set, it takes forever to load and freezes. It does load a new set or a different set fine however.
3. For mainframe walkers, there are no boxes for the + or - icons in the left side of the card.
I downloaded the files from the front page of your github on the first page of this thread.
I can put screenshots in there if that would help. I was hoping you would be kind enough to help me. Any ideas?
|
|
|
Post by harkel on Jul 28, 2021 6:26:03 GMT
A bit of an odd request, but I noticed that on the Mainframe DFC frame, you can't remove the bookmark for Sagas like you can for non-DFC sagas. Is that something that could be done?
|
|
|
Post by cardist on Jul 29, 2021 17:17:37 GMT
On somewhat of a tangent. I managed to get Udelude's effects to haphazardly work with your mainframe code. If I can get a fully stable version of that going, would you want it? Idk how to get in touch with Udelude, as they are not active on this new site currently. And I tried sending a message via their own website, but I wasn't able to send the message. So their sort of impossible to reach out to atm. Unless you know of any way to. Udelude went on a mission to explain the evils of technology to children (yes, really (like, completely seriously)) so i don't think you'll be able to contact them. what udelude effects are you talking about Well there were a few effects that actually worked after merging the code. The effect that I wanted, which worked, was the colorless/color land hybrid look. Some of the watermarks worked. I forget what else worked. I'll have to try it out again and give a more detailed run down.
|
|
Nonagon Infinity
2/2 Zombie
Posts: 123
Favorite Card: Barren Glory
Favorite Set: Future Sight
Color Alignment: Blue, Black, Red
|
Post by Nonagon Infinity on Jul 29, 2021 21:44:16 GMT
Well there were a few effects that actually worked after merging the code. The effect that I wanted, which worked, was the colorless/color land hybrid look. Some of the watermarks worked. I forget what else worked. I'll have to try it out again and give a more detailed run down. I suppose I'll throw my two cents in: Is is possible to change how the mainframe reads card color (via the mana cost rather than the card frame)?
|
|
|
Post by cajun on Jul 29, 2021 22:37:44 GMT
I did a clean re-install of your latest files cajun , but some errors that I had from my previous version still are happening. I put the files in a secondary hard drive I have in the programfiles 86 folder where the previous one was
These are my errors:
1. The console has a million error messages. 2. When I try to load my most recent set, it takes forever to load and freezes. It does load a new set or a different set fine however.
3. For mainframe walkers, there are no boxes for the + or - icons in the left side of the card.
I downloaded the files from the front page of your github on the first page of this thread.
I can put screenshots in there if that would help. I was hoping you would be kind enough to help me. Any ideas?
3. you're not using MSE 2.1.2. its included in those packs i just linked, make sure to replace the mse exe that you already have with the one with the same name in that pack. 1. after you do all that, if you still have any console errors, get a screenshot and post it
A bit of an odd request, but I noticed that on the Mainframe DFC frame, you can't remove the bookmark for Sagas like you can for non-DFC sagas. Is that something that could be done? there was a reason i didn't but i forget what it was so there's about a 50% chance that reason was i was low on time and it was zero priority. if its that i'll get an update to it
|
|
spazlaz
6/6 Wurm
Posts: 335
Color Alignment: Blue, Black
|
Post by spazlaz on Jul 29, 2021 23:01:24 GMT
You are correct on the version I was using. However, I did download the new folder and had all the correct templates and it still freezes on that specifc set. It is a large set, but i let it sit for like an hour and still nothing. Though, I thought that if MSE had any cards that it didn't have templates for, it just gave an option to replace them all with some other template when it loaded. It doesn't do that when I load my set, it just freezes. I did a clean re-install of your latest files cajun , but some errors that I had from my previous version still are happening. I put the files in a secondary hard drive I have in the programfiles 86 folder where the previous one was
These are my errors:
1. The console has a million error messages. 2. When I try to load my most recent set, it takes forever to load and freezes. It does load a new set or a different set fine however.
3. For mainframe walkers, there are no boxes for the + or - icons in the left side of the card.
I downloaded the files from the front page of your github on the first page of this thread.
I can put screenshots in there if that would help. I was hoping you would be kind enough to help me. Any ideas?
3. you're not using MSE 2.1.2. its included in those packs i just linked, make sure to replace the mse exe that you already have with the one with the same name in that pack. 1. after you do all that, if you still have any console errors, get a screenshot and post it
|
|
|
Post by harkel on Aug 1, 2021 0:34:26 GMT
A bit of an odd request, but I noticed that on the Mainframe DFC frame, you can't remove the bookmark for Sagas like you can for non-DFC sagas. Is that something that could be done? there was a reason i didn't but i forget what it was so there's about a 50% chance that reason was i was low on time and it was zero priority. if its that i'll get an update to it Alright! Thank you! (if that wasn't the reason, don't worry about it! Thanks for all the work you do!)
|
|
Zuty
3/3 Beast
Return to Ravnica 2 Hype!
Posts: 172
Favorite Card: Serra Angel
Favorite Set: Future Sight
Color Alignment: White, Blue, Red, Green, Colorless
|
Post by Zuty on Aug 1, 2021 4:24:10 GMT
I don't like posting here and I am sure no one here wants to even see me posting here, but I just updated all my templates and can't open up my master list anymore. No error logs are given, it just freezes up. It asks what template I want to use, but no matter what I select it just crashes. Says I am using stylesheet "new" and that it isn't found. Any suggestions on how to fix this?
|
|
|
Post by temp on Aug 1, 2021 8:53:04 GMT
Do you think it could be possible to add to mainframe 2 options to shrink the width of the illustrator line and the copyright line?
Thanks.
|
|
|
Post by fearjunkie on Aug 1, 2021 20:11:23 GMT
Is there any way I can get a download of MSE2 with all these templates pre-installed? I've been trying unsuccessfully all day to get Class cards working and I'm getting frustrated.
|
|
|
Post by cajun on Aug 2, 2021 6:16:55 GMT
I don't like posting here and I am sure no one here wants to even see me posting here, but I just updated all my templates and can't open up my master list anymore. No error logs are given, it just freezes up. It asks what template I want to use, but no matter what I select it just crashes. Says I am using stylesheet "new" and that it isn't found. Any suggestions on how to fix this?
likely you need to update your Mainframe Game FilesIs there any way I can get a download of MSE2 with all these templates pre-installed? I've been trying unsuccessfully all day to get Class cards working and I'm getting frustrated. Additional Resources -> MSE Downloads at the top of the page. the packs there have MSE 2.1.2 packed with various template arrangements that are up to date.
|
|
|
Post by arcmaster on Aug 2, 2021 21:25:59 GMT
Excuse me, the question is that I have not yet mastered how to handle the program's options correctly. Could you show me an image that shows how I should adjust the options in the Saga frame so that the chapters are blank? But I mean each and everyone please.
|
|
|
Post by cardist on Aug 4, 2021 7:34:40 GMT
cajun Hi cajun. The art I shared before is more similar to Ultimate Box Topper's style. The newer versions are considered "extended art" and look slightly different. I will make this an option. I'll provide it when I can provide it.
|
|
shagore
0/0 Germ
Posts: 16
Favorite Card: Twisted Reflection
Color Alignment: White, Blue, Red
|
Post by shagore on Aug 4, 2021 20:14:39 GMT
see if adding this to MSE/data/magic-m15-mainframe-planeswalker.mse-style fixes it It appears now masks are having an effect, but it's not properly working. Sub-boxes are superposed between the automatic creation from MSE and the one from the mask, and it seems now the title and type lines remain above the image despite the mask. Here you can see the effect on sub-textboxes. According to the mask and to the preview when placing the image, the quiver and the hair should pop out on the top and the arrow should pop out on the bottom. Yet here all I can see is the slight white bars because my mask isn't great (old one) I think this was missed, so I'll signal it again. Sorry if I appear to be insisting too much.
|
|
|
Post by cardcaptorvraska on Aug 4, 2021 20:22:52 GMT
Hi Cajun! First, thank you so much for your constant work on the templates here. Second, I do have a template request, I'm trying to do colorless adventures and devoid adventures, but I have no idea where to start in editing the files. any help would be appreciated!
|
|